INOXPA USA, INC

Plano

TX 75074, USA

+1 972 423 1750

inoxpa.us@inoxpa.com

ME-4100 In-line Mixer

  • In-line Mixer

The ME-4100 series of the inline high shear mixers offers a possibility to pump, disperse, homogenize and emulsify products with one and the same equipment.
Numerous chemical, food-processing, pharmaceutical and cosmetics production processes require this system as there are lines with ingredient separation or due to the lack of space inside the tanks to install vertical or bottom of the tank mixers.
These mixers are especially useful in already existing plants.
They can work with a recirculation tank reaching the best efficiency after several passes of the product through the mixer.

Request information

ME-4100 In-line Mixer

Operating principle

The casing is similar to a casing of a centrifugal pump, it houses the stator and the rotor. It is characterised by a high shear due to an adjusted tolerance between the rotor and the stator and the high speed of the rotor.
The product is suctioned through the inlet and the rotor pushes it to the stator. Passing through the slots of the stator the product is mechanically sheared, the particles are sheared by the rotor at the speed of more than 20 m/s.
And finally the flow is hydraulically sheared leaving the stator through the slots at a high speed.
If the viscosity of the product is higher than 200cP, it is recommended to put an auxiliary pump at the inlet of the mixer, and if a high discharge pressure is required, it is necessary to assemble another auxiliary pump.

Design and features

High shear, particle size reduction to less than 100 microns.
Sanitary single mechanical seal.
Slotted head (standard).
Various easily interchangeable working heads.
Completely CIPable design.
Drain port connection (in the casing): clamp DN-3/4".
Standard connections: Clamp ISO-2852.
Close-coupled construction, small baseplate.
Motor shroud.
Motors: IEC B35, IP 55, F-class insulation.

Materials

Parts in contact with the product: AISI 316L
Other stainless steel parts: AISI 304
Mechanical seal: C / SiC / EPDM
Gaskets: EPDM
Surface finish electropolish: Ra ≤ 0.8µm

Options

Disintegration head. 
Fine screen head. 
Cooled or pressurised mechanical seal. 
Connections: DIN 11851, SMS, flanges... 
Baseplate with antivibration legs. 
Trolley with/without control panel. 
Mirror polish Ra<0.5µm for the pharmaceutical applications. 
Other motor protections. 
Model ME-4130: possibility of a bare shaft construction.

Documents

Data sheet (8)
Instruction manual (10)
Operating principle

The casing is similar to a casing of a centrifugal pump, it houses the stator and the rotor. It is characterised by a high shear due to an adjusted tolerance between the rotor and the stator and the high speed of the rotor.
The product is suctioned through the inlet and the rotor pushes it to the stator. Passing through the slots of the stator the product is mechanically sheared, the particles are sheared by the rotor at the speed of more than 20 m/s.
And finally the flow is hydraulically sheared leaving the stator through the slots at a high speed.
If the viscosity of the product is higher than 200cP, it is recommended to put an auxiliary pump at the inlet of the mixer, and if a high discharge pressure is required, it is necessary to assemble another auxiliary pump.

Materials and Options

Parts in contact with the product: AISI 316L
Other stainless steel parts: AISI 304
Mechanical seal: C / SiC / EPDM
Gaskets: EPDM
Surface finish electropolish: Ra ≤ 0.8µm

Disintegration head. 
Fine screen head. 
Cooled or pressurised mechanical seal. 
Connections: DIN 11851, SMS, flanges... 
Baseplate with antivibration legs. 
Trolley with/without control panel. 
Mirror polish Ra<0.5µm for the pharmaceutical applications. 
Other motor protections. 
Model ME-4130: possibility of a bare shaft construction.

Documents
Document № FT.ME4100.2_ES
Title Mixer en línea ME 4100
File type .pdf
Summary La gama de Mixers de alto cizallamiento en línea ofrece la posibilidad de bombear, dispersar, homogeneizar y emulsionar productos con un mismo equipo.
    Download
    • E-mail
Document № FT.ME4100.2_EN
Title Inline mixer ME 4100
File type .pdf
Summary The ME-4100 series of the inline high shear mixers offers a possibility to pump, disperse, homogenize and emulsify products with one and the same equipment.
    Download
    • E-mail
Document № FT.ME4100.2_FR
Title Mixer en ligne ME 4100
File type .pdf
Summary La gamme de Mixers de haut cisaillement en ligne offre la possibilité de pomper, de disperser, d'homogénéiser et d'émulsionner des produits avec un même équipement.
    Download
    • E-mail
Document № FT.ME 4100.2_IT
Title Mixer en linea ME 4100
File type .pdf
Summary La gamma dei Mixer ad alto potere emulsionante in linea offre la posibilita di pompare, disperdere, omogeneizzare ed emulsionare prodotti con lo stesso impianto.
    Download
    • E-mail
Document № FT.ME4100.2_PT
Title Misturadora em linha ME-4100
File type .pdf
    Download
    • E-mail
Document № FT.ME4100.2_DE
Title Inline-Mischer ME 4100
File type .pdf
Summary Die Inline-Hochleistungs-Schneidmischer eignen sich zum Fördern, Dispergieren, Emulsionieren und Homogenisieren von Produkten mit einem einzigen Gerät.
    Download
    • E-mail
Document № FT.ME4100.2_RU
Title Миксер inline ME 4100
File type .pdf
Summary Линейные миксеры высокого усилия сдвига серии МЕ-4100 позволяют перекачивать, диспергировать, гомогенизировать и эмульсировать продукты.
    Download
    • E-mail
Document № FT.ME4100.2_CN
Title 管道混合器 ME 4100
File type .pdf
Summary ME-4100系列管道高剪切力混合器，提供了在同一设备上完成泵送，分散，均质和 产品乳化的功能。
    Download
    • E-mail
Document № 03.400.30.00ES
Title INSTRUCCIONES DE INSTALACIÓN, SERVICIO Y MANTENIMIENTO MIXER IN-LINE SERIE 4100
File type .pdf
    Download
    • E-mail
Document № 03.400.30.01ES
Title INSTRUCCIONES DE INSTALACIÓN, SERVICIO Y MANTENIMIENTO MIXER IN-LINE SERIE 4100 - ANEXO ATEX
File type .pdf
    Download
    • E-mail
Document № 03.400.30.00EN
Title INSTALLATION, SERVICE AND MAINTENANCE INSTRUCTIONS IN-LINE MIXER 4100 SERIES
File type .pdf
    Download
    • E-mail
Document № 03.400.30.01EN
Title INSTALLATION, SERVICE AND MAINTENANCE INSTRUCTIONS IN-LINE MIXER 4100 SERIES - ANNEX ATEX
File type .pdf
    Download
    • E-mail
Document № 03.400.30.00FR
Title INSTRUCTIONS D’INSTALLATION, DE SERVICE ET D’ENTRETIEN MIXEUR EN LIGNE SÉRIE 4100
File type .pdf
    Download
    • E-mail
Document № 03.400.30.01FR
Title INSTRUCTIONS D’INSTALLATION, DE SERVICE ET D’ENTRETIEN MIXEUR EN LIGNE SÉRIE 4100 - ANNEXE ATEX
File type .pdf
    Download
    • E-mail
Document № 03.400.30.00IT
Title ISTRUZIONI D’INSTALLAZIONE, USO E MANUTENZIONE MIXER IN-LINE SERIE 4100
File type .pdf
    Download
    • E-mail
Document № 03.400.30.00DE
Title INSTALLATIONS --, BETRIEBS UND WARTUNGSANLEITUNG INLINE-MISCHER SERIE 4100
File type .pdf
    Download
    • E-mail
Document № 03.400.30.00RU
Title ИНСТРУКЦИИ ПО УСТАНОВКЕ, ЭКСПЛУАТАЦИИ И ТЕХНИЧЕСКОМУ ОБСЛУЖИВАНИЮ МИКСЕР МЕ-4100
File type .pdf
    Download
    • E-mail
Document № 03.400.30.00PO
Title INSTRUKCJA INSTALOWANIA OBSŁUGI I KONSERWACJI MIESZADŁA W LINII SERII 4100
File type .pdf
    Download
    • E-mail

Related products

Cookies Policy

This website uses cookies. We use cookies to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners who may combine it with other information that you’ve provided to them or that they’ve collected from your use of their services. However, blocking some types of cookies may affect your experience on the site and the services we can offer. Cookies policy page

Reject all cookies Allow all cookies
Allow selection
Necessary (2)
Preferences (0)
Statistics (7)
Marketing (11)
About cookies

Necessary cookies help make a website usable by enabling basic functions like page navigation and access to secure areas of the website. The website cannot function properly without these cookies.

Preference cookies enable a website to remember information that changes the way the website behaves or looks, like your preferred language or the region that you are in.

Statistic cookies help website owners to understand how visitors interact with websites by collecting and reporting information anonymously

Marketing cookies are used to track visitors across websites. The intention is to display ads that are relevant and engaging for the individual user and thereby more valuable for publishers and third party advertisers.

Name Provider Purpose Expiry Type
cc_cookie_accept www.inoxpausa.com Stores the user's cookie consent state for the current domain 1 year HTTP
PHPSESSID www.inoxpausa.com Preserves user session state across page requests. Session HTTP
collect Google Used to send data to Google Analytics about the visitor's device and behavior. Tracks the visitor across devices and marketing channels. Session Pixel
_ga Google Registers a unique ID that is used to generate statistical data on how the visitor uses the website. 2 years HTTP
_ga_# www.inoxpausa.com Used by Google Analytics to collect data on the number of times a user has visited the website as well as dates for the first and most recent visit. 2 years HTTP
_gat_ Google Used by Google Analytics to throttle request rate 1 day HTTP
_gid Google Registers a unique ID that is used to generate statistical data on how the visitor uses the website. 1 day HTTP
fr Facebook Registers a unique ID that is used to generate statistical data on how the visitor uses the website. 3 months HTTP
_fbp Facebook Registers a unique ID that is used to generate statistical data on how the visitor uses the website. 3 months HTTP
IDE Google Used by Google DoubleClick to register and report the website user's actions after viewing or clicking one of the advertiser's ads with the purpose of measuring the efficacy of an ad and to present targeted ads to the user. 1 year HTTP
ads/ga-audiences Google Used by Google AdWords to re-engage visitors that are likely to convert to customers based on the visitor's online behaviour across websites. Session Pixel
VISITOR_INFO1_LIVE YouTube Tries to estimate the users' bandwidth on pages with integrated YouTube videos. 179 days HTTP
YSC YouTube Registers a unique ID to keep statistics of what videos from YouTube the user has seen. Session HTTP
yt-remote-cast-installed YouTube Stores the user's video player preferences using embedded YouTube video. Session HTML
yt-remote-connected-devices YouTube Stores the user's video player preferences using embedded YouTube video. Persistent HTML
yt-remote-device-id YouTube Stores the user's video player preferences using embedded YouTube video. Persistent HTML
yt-remote-fast-check-period YouTube Stores the user's video player preferences using embedded YouTube video. Session HTML
yt-remote-session-app YouTube Stores the user's video player preferences using embedded YouTube video. Session HTML
yt-remote-session-app YouTube Stores the user's video player preferences using embedded YouTube video. Session HTML
yt-remote-session-name YouTube Stores the user's video player preferences using embedded YouTube video. Session HTML
Cookies are small text files that can be used by websites to make a user's experience more efficient. The law states that we can store cookies on your device if they are strictly necessary for the operation of this site. For all other types of cookies we need your permission. This site uses different types of cookies. Some cookies are placed by third party services that appear on our pages. You can at any time change or withdraw your consent from the Cookie Declaration on our website. Learn more about who we are, how you can contact us and how we process personal data in our Privacy Policy. Please state your consent ID and date when you contact us regarding your consent.